Technical data

RackSwitch G8124 Command Reference
Chapter 7: Maintenance Commands
 207BMD00076, January 2009
IGMP Group Information
Table 7-4 describes the IGMP Snooping maintenance commands.
Table 7-4 IGMP Multicast Group Maintenance Commands
Command Syntax and Usage
show ip igmp groups address <IP address>
Displays a single IGMP multicast group by its IP address.
Command mode: All
show ip igmp vlan <1-4094>
Displays groups on a single vlan.
Command mode: All
show ip igmp groups interface <port alias or number>
Displays all IGMP multicast groups on a single port.
Command mode: All
show ip igmp groups portchannel <trunk group number>
Displays all IGMP multicast groups on a single trunk group.
Command mode: All
show ip igmp groups
Displays information for all multicast groups.
Command mode: All
clear ip igmp groups
Clears the IGMP group table.
Command mode: All except User EXEC