Technical data

RackSwitch G8124 Command Reference
194
 Chapter 6: Boot Options BMD00076, January 2009
copy backup-config tftp
copy backup-config tftp://<IP address>/<path/file name>
Copy the backup configuration to a file on the selected TFTP server. Select a port, or press Enter
to use the default (management port).
Command Mode: Privileged EXEC
copy {image1|image2|boot-image} tftp [data-port|mgt-port]
copy {image1|image2|boot-image} tftp://<IP address>/<path/file name>
Copy software image file from the selected flash partition to a TFTP server. Select a port, or press
Enter to use the default (management port).
Command Mode: Privileged EXEC
copy tftp active-config [data-port|mgt-port]
copy tftp://<TFTP server address>/<path/file name> active-config
Copy configuration file from TFTP server to the active-config partition in the switch. Select a port,
or press Enter to use the default (management port).
Command Mode: Privileged EXEC
copy tftp backup-config [data-port|mgt-port]
copy tftp://<IP address>/<path/file name> backup-config
Copy configuration file from TFTP server to the backup-config partition in the switch. Select a
port, or press Enter to use the default (management port).
Command Mode: Privileged EXEC
copy tftp image1|image2|boot-image [data-port|mgt-port]
copy tftp://<IP address>/<path/file name>/{image1|image2|boot-image}
Copy software image file from a TFTP server to the selected flash partition on the switch. Select a
port, or press Enter to use the default (management port).
Command Mode: Privileged EXEC
Table 6-1 General Boot Commands
Command Syntax and Usage