Technical data

RackSwitch G8124 Command Reference
190
 Chapter 4: Configuration Commands BMD00076, January 2009
Show Active and Backup Configuration
You can view a summary of the current active and backup configuration.
Active Configuration command output
The following command displays active configuration information.
show active-config
Command mode: All except User EXEC
Table 4-72 Active and Backup Information Commands
Command Syntax and Usage
show active-config
Displays the parameters set for the active configuration. To view an example of the command
output, see page 190.
Command mode: All
show backup-configuration
Displays the parameters set for the backup configuration.
Command mode: All
Active configuration:
#
#switch-type "Blade Network Technologies Rack Switch G8124"
#Software Version 1.0.1
#
!
!
interface ip 1
ip address 11.11.11.1 255.255.255.0
enable
!
interface ip-mgmt address 127.16.2.52 255.255.0.0 127.16.1.1
!
end