Technical data

RackSwitch G8124 Command Reference
Chapter 4: Configuration Commands
 173BMD00076, January 2009
Table 4-56 UDP ACL Configuration Commands
Command Syntax and Usage
permit udp
{any|host <IP address>|<source IP address> <mask>}
[eq <UDP port number>|gt <UDP port number>|lt <UDP port number>|
range <UDP port number> <UDP port number>]
{any|host <IP address>}|<dest. IP address> <mask>}
[eq <UDP port number>|gt <UDP port number>|lt <UDP port number>|
range <UDP port number> <UDP port number>]
[tos {max-reliability|max-throughput|min-delay|normal|<0-7>}|
dscp <0-63>]
[user-priority <0-7>]
Permits UDP packets that match the specified criteria.
Command mode: IP Extended ACL
deny udp
{any|host <IP address>|<source IP address> <mask>}
[eq <UDP port number>|gt <UDP port number>|lt <UDP port number>|
range <UDP port number> <UDP port number>]
{any|host <IP address>}|<dest. IP address> <mask>}
[eq <UDP port number>|gt <UDP port number>|lt <UDP port number>|
range <UDP port number> <UDP port number>]
[tos {max-reliability|max-throughput|min-delay|normal|<0-7>}|
dscp <0-63>]
[user-priority <0-7>]
Denies UDP packets that match the specified criteria.
Command mode: IP Extended ACL