Technical data

RackSwitch G8124 Command Reference
172
 Chapter 4: Configuration Commands BMD00076, January 2009
UDP ACL Configuration
The UDP ACL specifies which packets to permit or deny, based on the matching criteria, as
described below:
 udp = User Datagram Protocol
 Source IP address
 Port number or range, as follows:
eq = TCP port number is equal to the specified value
gt = TCP port number is greater than to the specified value
lt = TCP port number is less than to the specified value
range = TCP port number is within the specified range
 Destination IP address
 tos = Type of Service
 dscp = Differentiated Services Code Point (DSCP) value
 user-priority = User priority value