Technical data

RackSwitch G8124 Command Reference
Chapter 4: Configuration Commands
 167BMD00076, January 2009
permit
{any|host <source MAC address>}
{any|host <dest. MAC address>}
ipv4
[user-priority <0-7>] [vlan <1-4094>]
Permits Layer 2 traffic that matches the specified protocol type and associated parameters.
Command mode: MAC Extended ACL
deny
{any|host <source MAC address>}
{any|host <dest. MAC address>}
ipv4
[user-priority <0-7>] [vlan <1-4094>]
Permits Layer 2 traffic that matches the specified protocol type and associated parameters.
Command mode: MAC Extended ACL
permit
{any|host <source MAC address>}
{any|host <dest. MAC address>}
rarp
[user-priority <0-7>] [vlan <1-4094>]
Permits Layer 2 traffic that matches the specified protocol type and associated parameters.
Command mode: MAC Extended ACL
deny
{any|host <source MAC address>}
{any|host <dest. MAC address>}
rarp
[user-priority <0-7>] [vlan <1-4094>]
Permits Layer 2 traffic that matches the specified protocol type and associated parameters.
Command mode: MAC Extended ACL
Table 4-53 MAC Extended ACL Commands
Command Syntax and Usage