Technical data

RackSwitch G8124 Command Reference
16
 Chapter 1: ISCLI Basics BMD00076, January 2009
Each mode provides a specific set of commands. The command set of a higher-privilege mode
is a superset of a lower-privilege mode — all lower-privilege mode commands are accessible
when using a higher-privilege mode. Table 1-1 lists the ISCLI command modes.
Table 1-1 ISCLI Command Modes
Command Mode/Prompt Command used to enter or exit
User EXEC
G8124>
Default mode, entered automatically on console.
Exit: exit or logout
Privileged EXEC
G8124#
Enter Privileged EXEC mode, from User EXEC mode:
enable
Exit to User EXEC mode: disable
Quit ISCLI: exit or logout
Global
Configuration
G8124(config)#
Enter Global Configuration mode, from Privileged EXEC
mode:
configure terminal
Exit to Privileged EXEC: end or exit
Interface IP
Configuration
G8124(config-ip-if)#
Enter Interface IP Configuration mode, from Global Configura-
tion mode:
interface ip 1
Exit to Global Configuration mode: exit
Exit to Privileged EXEC mode: end
Interface Port
Configuration
G8124(config-if)#
Enter Port Configuration mode from Global Configuration mode:
interface port <port alias or number>
Exit to Global Configuration mode: exit
Exit to Privileged EXEC mode: end
Portchannel
Configuration
G8124(config-if)#
Enter Portchannel Configuration mode from Global Configura-
tion mode:
portchannel <trunk group number>
Exit to Global Configuration mode: exit
Exit to Privileged EXEC mode: end
ACL IP Standard Access List Con-
figuration
G8124 (config-std-nacl)#
Enter the Access Control List (ACL) IP Standard Configuration
mode.
access-list ip <128-256> standard
Exit to Global Configuration mode: exit
Exit to Privileged EXEC mode: end
ACL IP Extended Access List
Configuration
G8124 (config-ext-nacl)#
Enter the Access Control List (ACL) IP Extended Configuration
mode.
access-list ip <128-256> extended
Exit to Global Configuration mode: exit
Exit to Privileged EXEC mode: end