Technical data

RackSwitch G8124 Command Reference
156
 Chapter 4: Configuration Commands BMD00076, January 2009
Layer 3 Configuration
Table 4-42 describes basic Layer 3 Configuration commands. The following sections provide more
detailed information and commands.
Table 4-42 Layer 3 Configuration Commands
Command Syntax and Usage
interface ip 1
Enters Interface IP configuration mode. Configures the IP Interface for in-band management.
To view command options, see page 157.
Command mode: Global configuration
interface ip-mgmt address {<IP address>}
Configures the IP address of the management interface, using dotted decimal notation.
Command mode: Global configuration
interface ip-mgmt netmask {<IP netmask>}
Configures the IP subnet address mask for the management interface, using dotted decimal
notation.
Command mode: Global configuration
[no] interface ip-mgmt dhcp
Enables or disables the DHCP client on the management interface.
Command mode: Global configuration
interface ip-mgmt gateway
Configures the default gateway for the management interface.
Command mode: Global configuration
[no] interface ip-mgmt enable
Enables or disables the management interface.
Command mode: Global configuration
show layer3 information
Displays the current IP configuration.
Command mode: All