Technical data

RackSwitch G8124 Command Reference
Chapter 4: Configuration Commands
 155BMD00076, January 2009
Private VLAN Configuration
Use the following commands to configure Private VLAN.
Table 4-41 Private VLAN Commands
Command Syntax and Usage
private-vlan type primary
Configures the VLAN type as a Primary VLAN. The primary VLAN carries unidirectional traffic
to ports on the isolated VLAN or to community VLAN.
Command mode: VLAN configuration
private-vlan type community
Configures the VLAN type as a community VLAN. Community VLANs carry upstream traffic
from host ports. A Private VLAN may have multiple community VLANs.
Command mode: VLAN configuration
private-vlan type isolated
Configures the VLAN type as an isolated VLAN. The isolated VLAN carries unidirectional traffic
from host ports. A Private VLAN can have only one isolated VLAN.
Command mode: VLAN configuration
no private-vlan type
Clears the private VLAN type. You can use the command only when Private VLAN is disabled.
Command mode: VLAN configuration
[no] private vlan map [<2-4094>]
Configures Private VLAN mapping between a secondary VLAN and a primary VLAN. Enter the
primary VLAN ID. Secondary VLANs have the type defined as isolated or community.
Command mode: VLAN configuration
[no] private-vlan enable
Enables or disables the private VLAN. The default value is disabled.
Command mode: VLAN configuration
show private-vlan [<2-4094>]
Displays current parameters for the selected Private VLAN(s).
Command mode: All