Technical data

RackSwitch G8124 Command Reference
138
 Chapter 4: Configuration Commands BMD00076, January 2009
FDB Configuration
Use the following commands to configure the Forwarding Database (FDB).
Static FDB Configuration
Use the following commands to configure static entries in the Forwarding Database (FDB).
Table 4-27 FDB Configuration Commands
Command Syntax and Usage
mac-address-table aging <10-65535>
Configures the aging value for FDB entries, in seconds. The default value is 300.
Command mode: Global configuration
[no] mac-address-table mac-notification
Enables MAC Address Notification on the port. With MAC Address Notification enabled,
the switch generates a syslog message when a MAC address is added or removed from the MAC
address table.
Command mode: Interface Port
show mac-address-table
Displays current FDB configuration.
Command mode: All
Table 4-28 FDB Configuration Commands
Command Syntax and Usage
mac-address-table static <MAC address> <VLAN number (1-4094)>
<port alias or number>
Adds a permanent FDB entry.
Command mode: Global configuration
no mac-address-table static <MAC address>| all
Deletes the selected permanent FDB entries.
Command mode: Global configuration
clear mac-address-table {static|all}
Clears static FDB entries.
Command mode: All except User EXEC
show mac-address-table
Displays current FDB configuration.
Command mode: All