Technical data

RackSwitch G8124 Command Reference
Chapter 4: Configuration Commands
 125BMD00076, January 2009
SNMPv3 Target Address Table Configuration
These commands allow you to set passwords and display current user statistics.
Passwords can be a maximum of 15 characters. To disable a user, set the password to null.
Table 4-15 Target Address Table Configuration Commands
Command Syntax and Usage
snmp-server target-address {<1-16>} address {<IP address>}
name <1-32 characters>
Configures the locally arbitrary, but unique identifier, target address name associated with this
entry.
Command mode: Global configuration
snmp-server target-address {<1-16>} name {<1-32 characters>}
address <transport IP address>
Configures a transport address IP that can be used in the generation of SNMP traps.
Command mode: Global configuration
snmp-server target-address {<1-16>} taglist <1-255 characters>
Configures a list of tags that are used to select target addresses for a particular operation.
Command mode: Global configuration
snmp-server target-address {<1-16>} parameters-name <1-32 characters>
Defines the name as defined in the following command:
snmp-server target-parameters {<1-16>} name <1-32 characters>.
Command mode: Global configuration
no snmp-server target-address {<1-16>}
Deletes the Target Address Table entry.
Command mode: Global configuration
show snmp-server v3 target-address {<1-16>}
Displays the current Target Address Table configuration.
Command mode: All