Technical data

RackSwitch G8124 Command Reference
122
 Chapter 4: Configuration Commands BMD00076, January 2009
View-Based Access Control Model Configuration
The view-based Access Control Model defines a set of services that an application can use for
checking access rights of the user. Access control is needed when the user has to process
SNMP retrieval or modification request from an SNMP entity.
Table 4-12 View-based Access Control Model Commands
Command Syntax and Usage
snmp-server access {<1-32>} name <1-32 characters>
Defines the name of the group.
Command mode: Global configuration
snmp-server access {<1-32>} security {usm|snmpv1|snmpv2}
Allows you to select the security model to be used.
Command mode: Global configuration
snmp-server access {<1-32>} level {noauthnopriv|authnopriv|authpriv}
Defines the minimum level of security required to gain access rights. The level noAuthNoPriv
means that the SNMP message will be sent without authentication and without using a privacy pro-
tocol. The level authNoPriv means that the SNMP message will be sent with authentication but
without using a privacy protocol. The authPriv means that the SNMP message will be sent both
with authentication and using a privacy protocol.
Command mode: Global configuration
snmp-server access {<1-32>} read-view <1-32 characters>
Defines a read view name that allows read access to a particular MIB view. If the value is empty or
if there is no active MIB view having this value, then no access is granted.
Command mode: Global configuration
snmp-server access {<1-32>} write-view <1-32 characters>
Defines a write view name that allows write access to the MIB view. If the value is empty or if
there is no active MIB view having this value, then no access is granted.
Command mode: Global configuration
snmp-server access {<1-32>} notify-view <1-32 characters>
Defines a notify view name that allows notify access to the MIB view.
Command mode: Global configuration
show snmp-server v3 access {<1-32>}
Displays the View-based Access Control configuration.
Command mode: All