Technical data

RackSwitch G8124 Command Reference
Chapter 4: Configuration Commands
 117BMD00076, January 2009
Table 4-8 System SNMP Commands
Command Syntax and Usage
[no] snmp-server name <1-64 characters>
Configures the name for the system.
Command mode: Global configuration
[no] snmp-server location <1-64 characters>
Configures the name of the system location.
Command mode: Global configuration
snmp-server contact <1-64 characters>
Configures the name of the system contact.
Command mode: Global configuration
snmp-server read-community <1-32 characters>
Configures the SNMP read community string. The read community string controls SNMP “get”
access to the switch. The default read community string is public.
Command mode: Global configuration
snmp-server write-community <1-32 characters>
Configures the SNMP write community string. The write community string controls SNMP “set”
and “get” access to the switch. The default write community string is private.
Command mode: Global configuration
[no] snmp-server authentication-trap
Enables or disables the use of the system authentication trap facility.
The default setting is disabled.
Command mode: Global configuration
[no] snmp-server link-trap
Enables or disables the sending of SNMP link up and link down traps.
The default setting is enabled.
Command mode: Global configuration
show snmp-server
Displays the current SNMP configuration.
Command mode: All