Manualshelf

Technical data

ManualsBrandsBlade Network Technologies ManualsComputer equipmentRACKSWITCH G8124
111112113114115116117118119120
RackSwitch G8124 Command Reference
Chapter 4: Configuration Commands
115BMD00076, January 2009
NTP Server Configuration
These commands enable you to synchronize the switch clock to a Network Time Protocol
(NTP) server. By default, this option is disabled.
[no] tacacs-server command-authorization
Enables or disables TACACS+ command authorization.
Command mode: Global configuration
[no] tacacs-server command-logging
Enables or disables TACACS+ command logging.
Command mode: Global configuration
[no] tacacs-server enable
Enables or disables the TACACS+ server.
Command mode: Global configuration
show tacacs-server
Displays current TACACS+ configuration parameters.
Command mode: All
Table 4-7 NTP Configuration Commands
Command Syntax and Usage
[no] ntp primary-server <IP address>
Sets the IP address of the primary NTP server to which you want to synchronize the switch clock.
Command mode: Global configuration
[no] ntp secondary-server <IP address>
Sets the IP address of the secondary NTP server to which you want to synchronize the switch
clock.
Command mode: Global configuration
Table 4-6 TACACS+ Server Commands
Command Syntax and Usage