Technical data

RackSwitch G8124 Command Reference
Chapter 4: Configuration Commands
 109BMD00076, January 2009
[no] system notice2 <1-255 characters>
Configures the contents of the second notice that you want users to see before they login to the
console CLI. This notice can contain up to 255 characters and new lines. All notices are displayed
when you enter the following command: show system
Command mode: Global configuration
[no] system notice3 <1-255 characters>
Configures the contents of the third notice that you want users to see before they login to the con-
sole CLI. This notice can contain up to 255 characters and new lines. All notices are displayed
when you enter the following command: show system
Command mode: Global configuration
[no] system notice4 <1-255 characters>
Configures the contents of the fourth notice that you want users to see before they login to the con-
sole CLI. This notice can contain up to 255 characters and new lines. All notices are displayed
when you enter the following command: show system
Command mode: Global configuration
[no] system notice5 <1-255 characters>
Configures the contents of the fifth notice that you want users to see before they login to the con-
sole CLI. This notice can contain up to 255 characters and new lines. All notices are displayed
when you enter the following command: show system
Command mode: Global configuration
[no] banner <1-255 characters>
Configures a login banner of up to 255 characters. After a user or administrator logs into the
switch, the login banner is displayed.
Command mode: Global configuration
terminal-length <0-300>
Configures the number of lines per screen on the terminal console.
Command mode: All except User EXEC
hostname <1-64 characters>
Enables displaying of the host name (system administrator’s name) in the CLI.
Command mode: Global configuration
show system acknowledgement
Displays information about software used in the system.
Command mode: All
show system
Displays the current system parameters.
Command mode: All
Table 4-2 System Configuration Commands
Command Syntax and Usage