Installation guide

RackSwitch G8124 Installation Guide
BPP-00018-01, December 2009 Chapter 2: Installing the RackSwitch G8124
 31
3. The rear mounting brackets are secured to the rack with M6 screws, washers, and clip nuts. Torque
the screws to approximately 30 inch-pounds (3.5 Nm).
Figure 12 Attaching Rear Mounting Brackets
4. The front mounting brackets and the rear mounting brackets are secured with M3 screws. Torque
the screws to approximately 4 inch-pounds (0.5 Nm).
Figure 13 Securing the Rear Bracket to the Front Bracket