Installation guide

RackSwitch G8124 Installation Guide
BPP-00018-01, December 2009 Chapter 2: Installing the RackSwitch G8124
 29
Installing the RackSwitch G8124 in a
4-post Rack
This section provides general information about installing the RackSwitch G8124 in a 4-post rack,
including the IBM e1350 - Type 1410. For information about mounting the G8124 in other rack
types, refer to the following sections:
 “Installing the RackSwitch G8124 in a Standard Equipment Rack” on page 23
 “Installing the RackSwitch G8124 in an iDataPlex Rack” on page 26
The 4-post mounting kit is ordered separately. The following table lists the parts included in the
standard 4-post mounting kit.
The e1350 -Type 1410 mounting kit is ordered separately. The following table lists the parts
included in the mounting kit.
Table 15 BN-4POST-RLS 4-Post Rack Mount Kit
Item number Part number Description Quantity
1 BMC-00069-00 M6 clip nuts 8
2 BMC-00015-01 M6 locking washers 8
3 BMC-00049-00 M4 screws 16
4 BMC-00056-00 M6 screws 8
5 BMC-00084-00 M6 cage nuts 8
6 BMC-00054-00 M3 screws 4
7 BMM-00125-00 Front bracket 2
8 BMM-00126-00 Rear bracket 2
Table 16 BN-MNT-HZ-RLS Type 1410 Rack Mount Kit
Item number Part number Description Quantity
1 BMM-00065-00 Left bracket 1
2 BMM-00067-00 Right bracket 1
3 BMM-00089-00 Filler plate 1
4 BMC-00056-00 M6 screws 12
4 BMC-00015-01 M6 locking washers 12
4 BMC-00069-00 M6 clip nuts 8
5 BMC-00049-00 M4 screws 16