Technical data

BLADE OS Command Reference
48
 The Information Menu BMD00127, September 2009
/info/stack
Stacking Information
Table 4-12 lists the Stacking Information commands.
[Stacking Menu]
switch - Show switch information
link - Show stack link information
vers - Show switch firmware information
ip - Show Master and Backup IP information
path - Show inter switch packet path map
pushstat - Show config/image push status information
dump - Dump all stacking information
Table 4-12 Stacking Information menu (/info/stack)
Command Syntax and Usage
switch
Displays information about each switch in the stack, including:
 Configured Switch Number (csnum)
 Assigned Switch Number (asnum)
 MAC address
 Stacking state
link
Displays link information for each switch in the stack.
vers
Displays the firmware version number for the selected switch.
ip
Displays the IP address and gateway of the Master Switch Interface and the Backup Switch Inter-
face.
path
Displays the Stacking packet path map that shows how the stack switches are connected.
pushstat
Displays the status of the most recent firmware and configuration file push from the master to
member switches.
dump
Displays all stacking information.