Technical data

BLADE OS Command Reference
34
 The Information Menu BMD00127, September 2009
l3
Displays the Layer 3 Information Menu. For details, see page 59.
qos
Displays the Quality of Service (QoS) Information Menu. For details, see page 67.
acl
Displays the current configuration profile for each Access Control List (ACL) and ACL Group.
For details, see page 69.
link
Displays configuration information about each port, including:
 Port alias and number
 Port speed
 Duplex mode (half, full, or auto)
 Flow control for transmit and receive (no or yes)
 Link status (up, down or disabled)
For details, see page 70.
port
Displays port status information, including:
 Port alias and number
 Whether the port uses VLAN Tagging or not
 Port VLAN ID (PVID)
 Port name
 VLAN membership
For details, see page 71.
transcvr
Displays the status of the port transceiver module on each Fiber External Port.
For details, see page 72.
dump
Dumps all switch information available from the Information Menu (10K or more, depending on
your configuration).
If you want to capture dump data to a file, set your communication software on your workstation to
capture session data prior to issuing the dump commands.
Table 4-1 Information Menu Options (/info)
Command Syntax and Usage