Technical data

BLADE OS Command Reference
First-Time Configuration
 23BMD00127, September 2009
3. From the Configuration Menu, use the following command to select the System Menu:
4. From the System Menu, use the following command to select the System Access Menu:
5. Select the user password.
6. Enter the current administrator password at the prompt.
Only the administrator can change the user password. Entering the administrator password
confirms your authority.
7. Enter the new user password at the prompt:
8. Enter the new user password, again, at the prompt:
9. Apply and save your changes:
>> Configuration# sys
>> System# access
System# user/usrpw
Changing USER password; validation required...
Enter current administrator password:
Enter new user password:
Re-enter new user password:
System# apply
System# save