Technical data

BLADE OS Command Reference
The Boot Options Menu
 211BMD00127, September 2009
Resetting the Switch
You can reset the switch to make your software image file and configuration block changes occur.
To reset the switch, at the Boot Options# prompt, enter:
You are prompted to confirm your request.
Accessing the ISCLI
The default command-line interface for the switch is the BLADE OS CLI. To access the
ISCLI, enter the following command and reset the switch:
To access the BLADE OS CLI, enter the following command from the ISCLI and reload the
switch:
Users can select the CLI mode upon login, if the /boot/prompt command is enabled.
Only an administrator connected through the CLI can view and enable /boot/prompt.
When /boot/prompt is enabled, the first user to log in can select the CLI mode. Subse-
quent users must use the selected CLI mode, until all users have logged out.
>> Boot Options# reset
Main# boot/mode iscli
Router(config)# boot cli-mode blade-os