Technical data

BLADE OS Command Reference

The Boot Options Menu

 209BMD00127, September 2009

Uploading a Software Image from Your Switch

You can upload a software image from the switch to a TFTP server.

1. At the Boot Options# prompt, enter:

2. The system prompts you for information. Enter the desired image:

3. Enter the name or the IP address of the TFTP server:

4. Enter the name of the file into which the image will be uploaded on the TFTP server:

5. The system then requests confirmation of what you have entered. To have the file

uploaded, enter Y.

Boot Options# ptimg

Enter name of switch software image to be uploaded

["image1"|"image2"|"boot"]: <image>

Enter hostname or IP address of TFTP server:

Enter name of file on TFTP server: <filename>

image2 currently contains Software Version 1.0.1

that was downloaded at 0:23:39 Thu Jan 4, 2009.

Upload will transfer image2 (2788535 bytes) to file "image1"

on TFTP server 1.90.90.95.

Confirm upload operation (y/n) ? y