Technical data

BLADE OS Command Reference
206
 The Boot Options Menu BMD00127, September 2009
Stacking Boot Options
The Stacking Boot menu is used to define the role of the switch in a stack: either as the Master
that controls the stack, or as a participating Member switch. Options are available for loading
stack software to individual Member switches, and to configure the VLAN that is reserved for
inter-switch stacking communications.
/boot/stack
Stacking Boot Menu
[Boot Stacking Menu]
mode - Set the stacking mode for the switch
vlan - Set VLAN number for control communication
clear - Set stacking parameters to factory default
pushimg - Push image to a switch in the stack
cur - Display current stacking boot parameters
Table 8-1 Stacking Boot menu (/boot/stack)
Command Syntax and Usage
mode master|member
Configures the Stacking mode for the selected switch.
vlan <VLAN number>
Configures the VLAN used for Stacking control communication.
clear
Resets the Stacking boot parameters to their default values.
pushimg image1|image2|boot
Pushes the selected software file from the master to the selected switch.
cur
Displays current Stacking boot parameters.