Technical data

BLADE OS Command Reference
The Operations Menu
 203BMD00127, September 2009
/oper/port <port number>/8021x
Operations-Level Port 802.1X Options
Operations-level port 802.1X options are used to temporarily set 802.1X parameters for a port.
/oper/sys
Operational System Options
[802.1X Operation Menu]
reset - Reinitialize 802.1X access control on this port
reauth - Initiate reauthentication on this port now
Table 7-3 Operations-Level Port 802.1X Menu Options (/oper/port x/8021x)
Command Syntax and Usage
reset
Re-initializes the 802.1X access-control parameters for the port. The following actions take place,
depending on the 802.1X port configuration:
 force unauth - the port is placed in unauthorized state, and traffic is blocked.
 auto - the port is placed in unauthorized state, then authentication is initiated.
 force auth - the port is placed in authorized state, and authentication is not required.
reauth
Re-authenticates the supplicant (client) attached to the port. This command only applies if the
port’s 802.1X mode is configured as auto.
[Operational System Menu]
i2c - System I2C
Table 7-4 Operational System menu options (/oper/sys)
Command Syntax and Usage
i2c
Displays the operational system-level I2C menu. I2C commands are used by Technical
Support personnel.