Technical data

BLADE OS Command Reference
The Configuration Menu
 199BMD00127, September 2009
/cfg/acl/group <ACL Group number>
ACL Group Configuration
This menu allows you to compile one or more ACLs into an ACL Group. Once you create an
ACL Group, you can assign the ACL Group to one or more ports.
/cfg/dump
Dump
The dump program writes the current switch configuration to the terminal screen. To start the
dump program, at the Configuration# prompt, enter:
The configuration is displayed with parameters that have been changed from the default val-
ues. The screen display can be captured, edited, and placed in a script file, which can be used to
configure other switches through a Telnet connection. When using Telnet to configure a new
switch, paste the configuration commands from the script file at the command line prompt of
the switch. The active configuration can also be saved or loaded via TFTP, as described on
page 200.
[ACL Group 1 Menu]
add - Add ACL to group
rem - Remove ACL from group
cur - Display current ACL items in group
Table 6-71 ACL Group Menu Options (/cfg/acl/group x)
Command Syntax and Usage
add acl <1-768>
Adds the selected ACL to the ACL Group.
rem acl <1-768>
Removes the selected ACL from the ACL Group.
cur
Displays the current ACL group parameters.
Configuration# dump