Technical data

BLADE OS Command Reference
The Configuration Menu
 189BMD00127, September 2009
/cfg/acl/acl <ACL number>
ACL Configuration
These menus allow you to define filtering criteria for each Access Control List (ACL).
[ACL 1 Menu]
ethernet - Ethernet Header Options Menu
ipv4 - IP Header Options Menu
tcpudp - TCP/UDP Header Options Menu
meter - ACL Metering Configuration Menu
re-mark - ACL Re-mark Configuration Menu
pktfmt - Set to filter specific packet format types
egrport - Set to filter for packets egressing this port
action - Set filter action
stats - Enable/disable statistics for this acl
reset - Reset filtering parameters
cur - Display current filter configuration
Table 6-61 ACL Menu Options (/cfg/acl/acl x)
Command Syntax and Usage
ethernet
Displays the ACL Ethernet Header menu. To view menu options, see page 190.
ipv4
Displays the ACL IP Header menu. To view menu options, see page 191.
tcpudp
Displays the ACL TCP/UDP Header menu. To view menu options, see page 193.
meter
Displays the ACL Metering menu. To view menu options, see page 194.
re-mark
Displays the ACL Re-mark menu. To view menu options, see page 195.
pktfmt <packet format>
Displays the ACL Packet Format menu. To view menu options, see page 198.
egrport <port number>
Configures the ACL to function on egress packets.
action permit|deny|setprio <0-7>
Configures a filter action for packets that match the ACL definitions. You can choose to permit
(pass) or deny (drop) packets, or set the 802.1p priority level (0-7).