Technical data

BLADE OS Command Reference
180
 The Configuration Menu BMD00127, September 2009
/cfg/l3/igmp/mrouter
IGMP Static Multicast Router Configuration
Table 6-52 describes the commands used to configure a static multicast router.
NOTE – When you configure a static multicast router on a VLAN, the process of learning mul-
ticast routers is disabled for that VLAN.
[Static Multicast Router Menu]
add - Add port as Multicast Router Port
rem - Remove port as Multicast Router Port
cur - Display current Multicast Router configuration
Table 6-52 IGMP Static Multicast Router Menu Options (/cfg/l3/igmp/mrouter)
Command Syntax and Usage
add <port number> <VLAN number> <IGMP version number>
Selects a port/VLAN combination on which the static multicast router is connected, and configures
the IGMP version (1, 2, or 3) of the multicast router.
remove <port number> <VLAN number> <IGMP version number>
Removes a static multicast router from the selected port/VLAN combination.
cur
Displays the current IGMP Static Multicast Router parameters.