Technical data

BLADE OS Command Reference
174
 The Configuration Menu BMD00127, September 2009
/cfg/l2/vlan <VLAN number>
VLAN Configuration
The commands in this menu configure VLAN attributes, change the status of each VLAN,
change the port membership of each VLAN, and delete VLANs.
By default, the VLAN menu option is disabled except VLAN 1, which is enabled all the time.
Up to 1024 VLANs can be configured on the switch.
[VLAN 1 Menu]
name - Set VLAN name
add - Add port to VLAN
rem - Remove port from VLAN
def - Define VLAN as list of ports
ena - Enable VLAN
dis - Disable VLAN
del - Delete VLAN
cur - Display current VLAN configuration
Table 6-48 VLAN Configuration Menu Options (/cfg/l2/vlan)
Command Syntax and Usage
name
Assigns a name to the VLAN or changes the existing name. The default VLAN name is the first
one.
add <port number>
Adds port(s) to the VLAN membership.
rem <port number>
Removes port(s) from this VLAN.
def <list of port numbers>
Defines which ports are members of this VLAN. Every port must be a member of at least one
VLAN.
ena
Enables this VLAN.
dis
Disables this VLAN without removing it from the configuration.
del
Deletes this VLAN.
cur
Displays the current VLAN configuration.