Technical data

BLADE OS Command Reference
The Command Line Interface
 17BMD00127, September 2009
NOTE – With the exception of the “admin” user, access to each user level can be disabled by
setting the password to an empty value.
Command Line History and Editing
For a description of global commands, shortcuts, and command line editing functions, see
“Menu Basics” on page 25.”
Idle Timeout
By default, the switch will disconnect your Telnet session after 10 minutes of inactivity. This
function is controlled by the idle timeout parameter, which can be set from 1 to 60 minutes. For
information on changing this parameter, see “System Configuration” on page 115.
Table 1-1 User Access Levels
User Account Description and Tasks Performed Password
User The User has no direct responsibility for switch management.
He or she can view all switch status information and statistics,
but cannot make any configuration changes to the switch.
user
Operator The Operator manages all functions of the switch. The
Operator can reset ports, except the management port.
oper
Administrator
The superuser Administrator has complete access to all menus,
information, and configuration commands on the G8000,
including the ability to change both the user and administrator
passwords.
admin