Technical data

BLADE OS Command Reference
166
 The Configuration Menu BMD00127, September 2009
Use the following commands to configure IP trunk hash parameters for the switch.
Table 6-40 IP Trunk Hash Menu Options (/cfg/l2/thash/set)
Command Syntax and Usage
smac enable|disable
Enable or disable trunk hashing on the source MAC.
dmac enable|disable
Enable or disable trunk hashing on the destination MAC.
sip enable|disable
Enable or disable trunk hashing on the source IP.
dip enable|disable
Enable or disable trunk hashing on the destination IP.
cur
Display current layer 2 trunk hash setting.