Technical data

BLADE OS Command Reference
The Configuration Menu
 159BMD00127, September 2009
svrtmout <1-65535>
Sets the time, in seconds, the authenticator waits for a response from the RADIUS server before
declaring an authentication timeout. The default value is 30 seconds.
The time interval between transmissions of the RADIUS Access-Request packet containing
the supplicant’s (client’s) EAP-Response packet is determined by the current setting of
/cfg/sys/radius/timeout (default is 3 seconds).
maxreq <1-10>
Sets the maximum number of times the authenticator retransmits an EAP-Request packet to the
supplicant (client). The default value is 2.
raperiod <1-604800>
Sets the time, in seconds, the authenticator waits before re-authenticating a supplicant (client)
when periodic re-authentication is enabled. The default value is 3600 seconds.
reauth on|off
Sets the re-authentication status to on or off. The default value is off.
vassign on|off
Globally sets the dynamic VLAN assignment status to on or off. The default value is off.
This feature allows the RADIUS server to specify the VLAN for the port during 802.1x authenti-
cation.
default
Resets the global 802.1X parameters to their default values.
cur
Displays current global 802.1X parameters.
Table 6-34 802.1X Global Configuration Menu Options (/cfg/l2/8021x/global)
Command Syntax and Usage