Technical data

BLADE OS Command Reference
The Configuration Menu
 149BMD00127, September 2009
Temporarily Disabling a Port
To temporarily disable a port without changing its stored configuration attributes, enter the fol-
lowing command at any prompt:
Because this configuration sets a temporary state for the port, you do not need to use apply or
save. The port state will revert to its original configuration when the
switch is reset. See the
“Operations Menu” on page 201 for other operations-level commands.
/cfg/port <port number> aclqos
Port ACL Configuration
Main# /oper/port <port number>/dis
[Port 1:2 ACL Menu]
add - Add ACL or ACL group to this port
rem - Remove ACL or ACL group from this port
cur - Display current ACLs for this port
Table 6-25 Port ACL Menu Options (/cfg/port/aclqos)
Command Syntax and Usage
add acl|grp <ACL number or Group number, 1-768>
Adds the specified ACL or ACL Group to the port. You can add multiple ACL Groups to a port,
but the total number of precedence levels allowed is eight.
rem <ACL number, 1-768>
Removes the specified ACL or ACL Group from the port.
cur
Displays current ACL QoS parameters.