Technical data

BLADE OS Command Reference
148
 The Configuration Menu BMD00127, September 2009
/cfg/port <port number> gig
Port Link Configuration
Use these menu options to set port parameters for the port link.
Link menu options are described in Table 6-24 and appear on the gig port configuration menu
for the
switch. Use this menu to set port parameters such as speed, flow control, and negotiation
mode for the port link.
[Gigabit Link Menu]
speed - Set link speed
mode - Set full or half duplex mode
fctl - Set flow control
auto - Set auto negotiation
cur - Display current gig link configuration
Table 6-24 Port Link Configuration Menu Options (/cfg/port/gig)
Command Syntax and Usage
speed 10|100|1000|any
Sets the link speed. Some options are not valid on all ports. The choices include:
 10 Mbps
 100 Mbps
 1000 Mbps
 “Auto,” for auto negotiation
mode full|half|any
Sets the operating mode. The choices include:
 “Any,” for auto negotiation (default)
 Full-duplex
 Half-duplex
fctl rx|tx|both|none
Sets the flow control. The choices include:
 Receive flow control
 Transmit flow control
 Both receive and transmit flow control (default)
 No flow control
auto on|off
Enables or disables auto negotiation for the port.
cur
Displays current port parameters.