Technical data

BLADE OS Command Reference
146
 The Configuration Menu BMD00127, September 2009
/cfg/port <port number>
Port Configuration
Use the Port Configuration menu to configure settings for individual switch ports.
[Port 1:1 Menu]
gig - Gig Phy Menu
aclqos - Acl/Qos Configuration Menu
8021ppri - Set default 802.1p priority
pvid - Set default port VLAN id
name - Set port name
bpdugrd - Enable/disable BPDU Guard
dscpmrk - Enable/disable DSCP remarking for port
tag - Enable/disable VLAN tagging for port
tagpvid - Enable/disable tagging on pvid
ena - Enable port
dis - Disable port
cur - Display current port configuration
Table 6-23 Port Configuration Menu (/cfg/port)
Command Syntax and Usage
gig
If a port is configured to support Gigabit Ethernet, this option displays the Gigabit Ethernet Physi-
cal Link Menu. To view menu options, see page 148.
aclqos
Displays the ACL Quality of Service Menu. To view menu options, see page 149.
8021ppri <0-7>
Configures the port’s 802.1p priority level.
pvid <VLAN number, 1-4095>
Sets the default VLAN number which will be used to forward frames which are not VLAN tagged.
The default number is 1 for non-management ports.
name <64 character string>|none
Sets a name for the port. The assigned port name appears next to the port number on some infor-
mation and statistics screens. The default is set to none.
bpdugrd enable|disable
Enables or disables BPDU Guard on the port. If Spanning Tree BPDUs are received on the port,
BPDU Guard disables the port.
dscpmark
Enables or disables DSCP re-marking on a port.