Technical data

BLADE OS Command Reference
The Configuration Menu
 143BMD00127, September 2009
/cfg/sys/access/user
User Access Control Configuration
NOTE – User passwords can be a maximum of 128 characters.
[User Access Control Menu]
uid - User ID Menu
eject - Eject user
usrpw - Set user password (user)
opw - Set operator password (oper)
admpw - Set administrator password (admin)
strongpw - Strong password menu
cur - Display current user status
Table 6-20 User Access Control Menu Options (/cfg/sys/access/user)
Command Syntax and Usage
uid <User ID (1-10)>
Displays the User ID Menu. To view menu options, see page 144.
eject user|oper|admin|<user name>
Ejects the specified user from the switch.
usrpw <1-128 characters>
Sets the user (user) password. The user has no direct responsibility for switch management. He or
she can view switch status information and statistics, but cannot make any configuration changes.
The user password can have a maximum of 128 characters.
opw <1-128 characters>
Sets the operator (oper)password. The operator manages all functions of the switch. He or she
can view all switch information and statistics and can reset ports or the entire switch.
The operator password can have a maximum of 128 characters.
admpw <1-128 characters>
Sets the administrator (admin) password. The super user administrator has complete access to all
menus, information, and configuration commands on the G8000, including the ability to change
both the user and administrator passwords.
Access includes “oper” functions.
cur
Displays the current user status.