Technical data

BLADE OS Command Reference
140
 The Configuration Menu BMD00127, September 2009
cfg/sys/access
System Access Configuration
[System Access Menu]
mgmt - Management Network Definition Menu
user - User Access Control Menu (passwords)
https - HTTPS Web Access Menu
snmp - Set SNMP access control
tnport - Set Telnet server port number
tport - Set the TFTP Port for the system
wport - Set HTTP (Web) server port number
http - Enable/disable HTTP (Web) access
tnet - Enable/disable Telnet access
tsbbi - Enable/disable Telnet/SSH configuration from BBI
userbbi - Enable/disable user configuration from BBI
cur - Display current system access configuration
Table 6-18 System Access Menu Options (/cfg/sys/access)
Command Syntax and Usage
mgmt
Displays the Management Configuration Menu. To view menu options, see page 142.
user
Displays the User Access Control Menu. To view menu options, see page 143.
https
Displays the HTTPS Menu. To view menu options, see page 145.
snmp disable|read-only|read-write
Disables or provides read-only/write-read SNMP access.
tnport <TCP port number>
Sets an optional telnet server port number for cases where the server listens for telnet sessions on a
non-standard port.
tport <TFTP port number (1-65535)>
Sets the TFTP port for the switch. The default is port 69.
wport <TCP port number (1-65535)>
Sets the switch port used for serving switch Web content. The default is HTTP port 80. If Global
Server Load Balancing is to be used, set this to a different port (such as 8080).
http disable|enable
Enables or disables HTTP (Web) access to the Browser-Based Interface. It is enabled by default.
tnet enable|disable
Enables or disables Telnet access. This command is enabled by default.