Technical data

BLADE OS Command Reference
100
 The Statistics Menu BMD00127, September 2009
/stats/mp
Management Processor Statistics
[MP-specific Statistics Menu]
thr - Show STEM thread stats
i2c - Show I2C stats
pkt - Show Packet stats
tcb - Show All TCP control blocks in use
ucb - Show All UDP control blocks in use
cpu - Show CPU utilization
Table 5-21 Management Processor Statistics Menu Options (/stats/mp)
Command Syntax and Usage
thr
Displays STEM thread statistics. This command is used by Technical Support personnel.
i2c
Displays I2C statistics. This command is used by Technical Support personnel.
pkt
Displays packet statistics, to check for leads and load. To view a sample output and a description of
the stats, see page 101.
tcb
Displays all TCP control blocks that are in use. To view a sample output and a description of the
stats, see page 102.
ucb
Displays all UDP control blocks that are in use. To view a sample output, see page 102.
cpu
Displays CPU utilization for periods of up to 1, 4, and 64 seconds. To view a sample output and a
description of the stats, see page 103.