Specifications

36 Implementing IBM System Networking 10Gb Ethernet Switches
– Change tracking and remote logging with syslog feature.
– POST diagnostic tests.
򐂰 Special functions: Support for Serial over LAN (SOL)
򐂰 Standards supported:
The switch module supports the following IEEE standards:
– IEEE 802.1D Spanning Tree Protocol (STP).
– IEEE 802.1s Multiple STP (MSTP).
– IEEE 802.1w Rapid STP (RSTP).
– IEEE 802.1p Tagged Packets.
– IEEE 802.1Q Tagged VLAN (frame tagging on all ports when VLANs are enabled).
– IEEE 802.1x port-based authentication.
– IEEE 802.2 Logical Link Control.
– IEEE 802.3 10BASE-T Ethernet.
– IEEE 802.3u 100BASE-TX Fast Ethernet.
– IEEE 802.3ab 1000BASE-T Gigabit Ethernet.
– IEEE 802.3z 1000BASE-X Gigabit Ethernet.
– IEEE 802.3ad Link Aggregation Control Protocol.
– IEEE 802.3x Full-duplex Flow Control.
– IEEE 802.3ae 10GBASE-SR.
Connectors and LEDs
Figure 1-18 shows the front panel of the IBM 1/10 Uplink Ethernet Switch Module.
Figure 1-18 IBM 1/10 Uplink Ethernet Switch Module Front panel that shows connector and LED
locations