Specifications

Chapter 6. IBM Virtual Fabric 10Gb Switch Module implementation 281
Current VRRP virtual router 3:
vrid 30, 10.0.30.1, if 30, prio 100, adver 2, enabled
preem enabled, predelay 5, fast-advertisement disabled
track ports
AGG-2#
Run show ip vrrp counters to display VRRP statistics (Example 6-40).
Example 6-40 Show VRRP statistics
AGG-2#show ip vrrp counters
VRRP statistics:
vrrpInAdvers: 79786 vrrpBadAdvers: 25
vrrpOutAdvers: 174 vrrpOutGratuitousARPs: 2
vrrpBadVersion: 0 vrrpBadVrid: 0
vrrpBadAddress: 0 vrrpBadData: 0
vrrpBadPassword: 0 vrrpBadInterval: 25
AGG-2#
Run show ip vrrp track-priority-increment to display VRRP tracking priority
increments configuration (Example 6-41).
Example 6-41 Show VRRP tracking priority increments
AGG-1#show ip vrrp track-priority-increment
Current VRRP Tracking settings:
vrs 2, ifs 2, ports 50
AGG-1#
Run show ip vrrp virtual-router <1-15> track to display the selected virtual router
tracking configuration.
Example 6-42 Show the virtual router tracking configuration
AGG-1#show ip vrrp virtual-router 3 track
Current VRRP virtual router 3 tracking:
track ports
AGG-1#
6.6 IPv4 and IPv6 end-to-end connectivity verification
With both Top-of-Rack and embedded switches architecture implemented, our test host,
connected at the ends of the network, is now reachable and able to communicate on IPv4
and IPv6.