Specifications

Chapter 5. IBM System Networking RackSwitch implementation 197
IPv4 and IPv6 are configured on the same server interface (Teaming Adapter). There
is no need for additional configuration of the switch port, as shown in Example 5-45.
Example 5-45 Switch port configuration for a dual TCP/IP stack host
ACC-1#show interface information 7
Alias Port Tag RMON Lrn Fld PVID NAME VLAN(s)
------- ---- --- ---- --- --- ----- --------------
-------------------------------
7 7 n d e e 10 SRV1 10
* = PVID is tagged.
ACC-1#
ACC-1#show running-config | begin 7
interface port 7
name "SRV1"
pvid 10
exit
ACC-1#
The IPv4 and IPv6 configuration is implemented on the TeamAdapter interface that
aggregates the two 10 Gb ports. The operating system is dual stack enabled, as
shown in Figure 5-3.
Figure 5-3 Dual TCP/IP stack in Windows