Specifications

Chapter 4. Initial configuration: IBM System Networking 10Gb Ethernet switches 149
4.4.7 Firmware upgrade from the AMM web interface
The I/O Module Firmware Update option of the AMM web interface is currently not supported
for the IBM 10Gb Switches. If you try to update the firmware using this option, you receive the
message shown in Figure 4-14.
Figure 4-14 Firmware upgrade from the AMM web interface is not possible
4.4.8 Working with users and passwords
You can see users and passwords from the web interface. To do so, select the switch you
want to configure on the left side, and click System  User Table to see the user
configuration window, shown in Figure 4-15.
Figure 4-15 User configuration window from the web interface