Specifications

148 Implementing IBM System Networking 10Gb Ethernet Switches
From this interface, you can perform different configuration tasks on the switch. For more
details and configuration options, see the appropriate documentation:
򐂰 IBM RackSwitch G8264 Application Guide:
http://www-01.ibm.com/support/docview.wss?rs=1126&context=HW500&dc=DA400&uid=is
g3T7000326&loc=en_US&cs=utf-8&lang=en
򐂰 IBM Virtual Fabric 10Gb Switch Module for IBM BladeCenter - Installation Guide:
http://publib.boulder.ibm.com/infocenter/bladectr/documentation/topic/com.ibm.b
ladecenter.io_39Y9267.doc/81y1115.pdf
4.4.6 Setting the date and time
The embedded switch does not synchronize the date and time with the BladeCenter chassis,
so you must set it manually during the first boot. From the web session, choose your switch
from the list of switches and click System. A window with a set of options opens
(Figure 4-13). Set the date and time here.
Figure 4-13 System configuration menu from the web interface
Important: Remember to submit, apply, and save your configuration changes.