Specifications

146 Implementing IBM System Networking 10Gb Ethernet Switches
In the Advanced Configuration window, you can define the management ports to be visible
from the external ports. Depending on your needs, this action might be necessary to access
the switches. Typically, you enable this feature, unless you want to handle the switches only
from the AMM interface. We do not describe how to perform this procedure in this book.
4.4.4 Telnet access
You can start a telnet session from the window shown in Figure 4-9 on page 145. This
session is similar to any TOR switch. To learn how to enable Telnet access, see “Connecting
to the switch” on page 130.
The telnet session is shown in Figure 4-10.
Figure 4-10 Telnet session to the switch from the AMM
To end the session, just type exit and close the window.