Specifications

126 Implementing IBM System Networking 10Gb Ethernet Switches
After successfully logging on, the Switch Dashboard is displayed, as shown in Figure 4-2.
Figure 4-2 Switch Dashboard
For more details about the web interface, see following documents:
򐂰 IBM System Networking RackSwitch G8264 Browser-Based Interface Quick Guide:
https://www-304.ibm.com/support/docview.wss?uid=isg3T7000296&aid=1
򐂰 IBM System Networking RackSwitch G8124 Browser-Based Interface Quick Guide:
https://www-304.ibm.com/support/docview.wss?uid=isg3T7000301&aid=1
򐂰 IBM System Networking RackSwitch G8052 Browser-Based Interface Quick Guide:
https://www-304.ibm.com/support/docview.wss?uid=isg3T7000348&aid=1
During the first boot of your switch, you configure the basic options needed to continue
working with the switch, such as the IP address for the management interface, gateways, and
some other options. Because the first boot is for a TOR switch is different from the one for the
embedded version inside a BladeCenter chassis, we describe the differences and how to
configure them in each case.