Installation guide

RackSwitch G8000 Installation
52
 Appendix A: Safety and Compliance Statements BPP-00007-01, December 2009
European Union EMC Directive Conformance Statement
NOM Statement (Mexico only)
This product is in conformity with the protection requirements of EU Council Directive
2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic
compatibility. Blade Network Technologies, Inc. cannot accept responsibility for any failure to
satisfy the protection requirements resulting from a nonrecommended modification of the
product, including the fitting of unsupported option cards.
This product has been tested and found to comply with the limits for Class A Information
Technology Equipment according to CISPR 22/European Standard EN 55022. The limits for
Class A equipment were derived for commercial and industrial environments to provide
reasonable protection against interference with licensed communication equipment.
Attention: This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
The following information is provided on the devices described in this document in
compliance with the safety requirements of the Norma Oficial Méxicana (NOM):
Exporter:
Blade Network Technologies
2350 Mission College Blvd.
Santa Clara, CA, 95054 USA
Importer:
IMPORSYS, S.A. de C.V.28 de Diciembre No. 22
Col. Avante, C.P. 04460
México, D.F.
Input:
RackSwitch G8000
G8000F
AC 100-240 V~ 1.5 50-60 Hz
Chassis power consumption: 150W
G8000R
AC 100-240 V~ 1.5 50-60 Hz
Chassis power consumption: 150W