Installation guide

RackSwitch G8000 Installation
BPP-00007-01, December 2009 Chapter 2: Installing the RackSwitch G8000
 31
Installing the RackSwitch G8000 in a
4-post Rack
This section provides general information about installing the RackSwitch G8000 in a 4-post rack,
such as the IBM e1350. For information about mounting the G8000 in other rack types, refer to the
following sections:
 “Installing the RackSwitch G8000 in a Standard Equipment Rack” on page 26
 “Installing the RackSwitch G8000 in an iDataPlex Rack” on page 28
The 4-post mounting kit is ordered separately. The following table lists the parts included in the
4-post mounting kit.
Table 17 BN-MNT-HZ-RLS 4-Post Rack Mount Kit
Item number Part number Description Quantity
1 BMM-00065-00 Left bracket 1
2 BMM-00067-00 Right bracket 1
3 BMM-00089-00 Filler plate 1
4 BMC-00056-00 M6 screws 12
4 BMC-00015-01 M6 locking washers 12
4 BMC-00069-00 M6 clip nuts 8
5 BMC-00049-00 M4 screws 16