Installation guide

RackSwitch G8000 Installation

 Chapter 1: RackSwitch G8000 Description and Specifications BPP-00007-01, December 2009

Switch LEDs

Two LED stacks provide system status and port link status. The system LEDs are described in the

following table:

The following table describes the system LED indications:

RJ-45 LEDs

Status LEDs for the RJ-45 ports are described in the following table.

Power supplies and AC or DC power input status

Fans status

Stacking master indicator

Stacking member indicator

Table 6 System LEDs Status

Function Power

Supply

Fan Master Member XGE Port

Total Power Failure Off Off Off Off Off

Service Required Blink Green Blink Green Blink Green Blink Green Blink Green

Power Supplies OK Solid Green N/A N/A N/A N/A

Power Supply Failure Blink Green N/A N/A N/A N/A

Fans OK N/A Solid Green N/A N/A N/A

Fan Failure N/A Blink Green N/A N/A N/A

Stack Master N/A N/A On Off N/A

Stack Backup/Member N/A N/A Off On N/A

Stack Error N/AN/AOnOnN/A

Non-Stack Member N/A N/A Off Off N/A

Table 7 RJ45 LEDs Status

LED Solid Green Blink Green Off

Link Valid Link Activity No Link

Speed 100/1000Mbps N/A 10Mbps