Technical data

RackSwitch G8000 ISCLI Reference
82
 Chapter 3: Statistics Commands BMD00128, September 2009
LACP Statistics
Use the following command to display Link Aggregation Control Protocol (LACP) statistics
for the selected port:
show interface port {<port number>} lacp counters
Command mode: All
Link Aggregation Control Protocol (LACP) statistics are described in the following table:
port 1
-----------------------------------------
Valid LACPDUs received: - 0
Valid Marker PDus received: - 0
Valid Marker Rsp PDus received: - 0
Unknown version/TLV type: - 0
Illegal subtype received: - 0
LACPDUs transmitted: - 0
Marker PDUs transmitted: - 0
Marker Rsp PDUs transmitted: - 0
Table 3-9 LACP Statistics
Statistic Description
Valid LACPDUs
received
Total number of valid LACP data units received.
Valid Marker PDUs
received
Total number of valid LACP marker data units received.
Valid Marker Rsp
PDUs received
Total number of valid LACP marker response data units received.
Unknown version/TLV
type
Total number of LACP data units with an unknown version or type,
length, and value (TLV) received.
Illegal subtype
received
Total number of LACP data units with an illegal subtype received.
LACPDUs transmitted Total number of LACP data units transmitted.
Marker PDUs trans-
mitted
Total number of LACP marker data units transmitted.
Marker Rsp PDUs
transmitted
Total number of LACP marker response data units transmitted.