Technical data

RackSwitch G8000 ISCLI Reference
78
 Chapter 3: Statistics Commands BMD00128, September 2009
Port Interface Statistics
Use the following command to display the interface statistics for the selected port:
show interface port {<port number, or range of ports>} interface-counters
Command mode: All
dot3StatsFrameToo-
Longs
A count of frames received on a particular interface that exceed the maxi-
mum permitted frame size.
The count represented by an instance of this object is incremented when
the frameTooLong status is returned by the MAC service to the LLC
(or other MAC user). Received frames for which multiple error condi-
tions obtained are, according to the conventions of IEEE 802.3 Layer
Management, counted exclusively according to the error status presented
to the LLC.
dot3StatsInternal-
MacReceiveErrors
A count of frames for which reception on a particular interface fails due
to an internal MAC sub layer receive error. A frame is only counted by an
instance of this object if it is not counted by the corresponding instance of
either the dot3StatsFrameTooLongs object, the dot3Stats-
AlignmentErrors object, or the dot3StatsFCSErrors object.
The precise meaning of the count represented by an instance of this object
is implementation-specific. In particular, an instance of this object may
represent a count of received errors on a particular interface that are not
otherwise counted.
Interface statistics for port 1
ifHCIn Counters ifHCOut Counters
Octets: 0 929591360
UcastPkts: 0 1169045
BroadcastPkts: 0 3934187
MulticastPkts: 0 2425859
Discards: 0 855
Errors: 0 0
Table 3-6 Ethernet Statistics for Port
Statistics Description