Technical data

RackSwitch G8000 ISCLI Reference
Chapter 3: Statistics Commands
 75BMD00128, September 2009
Port Bridging Statistics
Use the following command to display the bridging statistics for the selected port:
show interface port {<port number>} bridging-counters
Command mode: All
Bridging statistics for port 1:
dot1PortInFrames: 63242584
dot1PortOutFrames: 63277826
dot1PortInDiscards: 296
dot1StpPortForwardTransitions: 1
Table 3-5 Port Bridging Statistics
Statistics Description
dot1PortInFrames The number of frames that have been received by this port from its seg-
ment. A frame received on the interface corresponding to this port is only
counted by this object if and only if it is for a protocol being processed by
the local bridging function, including bridge management frames.
dot1PortOutFrames The number of frames that have been transmitted by this port to its seg-
ment. Note that a frame transmitted on the interface corresponding to this
port is only counted by this object if and only if it is for a protocol being
processed by the local bridging function, including bridge management
frames.
dot1PortInDiscards Count of valid frames received which were discarded (that is, filtered) by
the Forwarding Process.
dot1StpPortForward
Transitions
The number of times this port has transitioned from the Learning state to
the Forwarding state.